G & B (North West) Ltd
GRP Roofing Manufacturer, GRP roofing systems - G & B (North West) Ltd

 



  • Information
  • C1
  • C2
  • C3INT
  • C3EXT
  • C4
Image:
GRP edge trim
Details:

C1/2/3/4 Corners


The application procedure is the same for all the corner trims listed below. The corner should be nailed to the deck at each end and in the middle. The joins between the trim and the corner should be sealed with a thin line of PU trim adhesive, a moist finger can be used to wipe the adhesive, ensuring it seals the entire joint. The joint is then bandaged over. Tissue should be used to ensure a smooth finish.

Trim name:

C1

Trim image:
GRP edge trim
Description:

Hot press moulded GRP pre-formed external corner.

Application:

For use with A200 and B260 profiles to form a left or right hand corner.

Trim name:

C2

Trim image:
GRP edge trim
Description:

Right and left hand mouldings available.

Application:

For use where a flat roof meets an abutting wall.

Compatible with A200, B260 and D260 profiles.

Trim name:

C3INT

Trim image:
GRP edge trim
Description:

Internal corner fillet trim.

Application:

Used as a pre-formed internal corner for D260 fillet trim.

Avoids mitring in situ.

Trim name:

C3EXT

Trim image:
GRP edge trim
Description:

External corner fillet trim.

Application:

Used as a pre-formed corner for the D260 fillet profile.

Avoids mitring in situ.

Trim name:

C4

Trim image:
GRP edge trim
Description:

Hot press moulded GRP pre-formed internal corner.

Application:

For use with A200 and B260 profiles to form a left or right hand corner.

Home  |   About Us  |   Applications  |   GRP Roofing Facts  |   GRP Edge Trims  |   Products  |   Gallery  |   Contact Us
G & B (North West) Ltd